Hydraulic fittings can are expensive of money when you purchase one new. If you may get an used one for a far discounted price this relates to the way to go. Here is what you should look whenever looking at used splitters.
Hydraulic splitters undergo great stresses and pressure in their operation therefore must be built from durable materials and places. If not they would quickly self destruct. Is recognized as and as a how simple these machines are they really don't wear out very fast if these types of well solidified. Hydraulic components use oil as a transfer of energy so calls for very little metal on metal and hydraulic components are naturally long lasting. Since hydraulic log splitters can last so long, purchasing pre-owned splitter could be a good way of thinking. Even if parts do wear out most of them are relatively less costly. I have three log splitters that happen to be in commercial service in almost 20 many they frequent still using the original hydraulic components.
When purchasing a splitter training course frame built of thick steel, specially the main I beam. To attempt test it first and ensure the beam doesn't flex much if at all when splitting a tough piece. Shop for good solid welds and big high grade bolts. When you have a good frame to start with it should last a long time. If you have to some in the mechanical components you can figure that into the price when negotiating with the seller. Here are a few factors to consider.
The engine is these most expensive part within a splitter in addition to most likely component to wear out. Make sure it quick to start and runs smooth. Not really it could possibly want work or need become replaced. Some engines could be replaced for $300 to $400 but some brands significantly more. Check the hydraulic components for escapes. If the pump, cylinder, or control valve is leaking hydraulic fluid perhaps it is an indication that these components will eventually need to be able to replaced or repaired. Although sometimes hydraulic components can leak forever and still work fine, but hydraulic fluid is not cheap in order that it may are cheaper in the end to replace the work pieces. Most hydraulic components don't cost much to replace anyway.
Leaking hydraulic hoses and fittings ought to be replaced but oftentimes just tightening them will get rid of the problem. Check the condition of the tubes. Sometimes hoses may look bad on the outside but it's simply the outside layer and the hose final a lengthy time. If the high pressure hoses have deep cracks or gouges replace them. A hose bursting and shooting hot hydraulic fluid everywhere is not much fun. Open the hydraulic reservoir and dip something in it to consider fluid. The fluid in order to relatively neat and not as well as white should donrrrt you have water in this article. If it's a towable splitter look at the tires be sure they have good tread and are not damaged. Purchasing can, jack up each tire and spin it to make sure the bearings turn smooth and private. This should give you some associated with what to shop for when hoping for an used splitter. The main thing would be to buy Hydraulic equipment. After that the components can be replaced easily nerve-racking only mildly mechanically ready. Just factor the replacement or repair costs into the price.