We professionally supply high quality hose and fittings.

ShIP to

Hydraulic Flanged Tube And Four-bolt Split Flange Type

by:Yober     2020-05-30
Scope--This SAE Standard covers complete general and dimensional specifications for the flanged heads and split flange clamp halves applicable to four-bolt split flange type tube, pipe, and hose connections with appropriate references to the O-ring seals and attaching components used in their assembly. (See Figures 1 and 2.) Also included are recommended port dimensions and port design considerations. The flanged heads specified are incorporated into fittings having suitable means for attachment of tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial products, where it is wished to avoid the use of threaded connections. THE RATED WORKING PRESSURE OF A HOSE ASSEMBLY COMPRISING SAE J518 HOSE CONNECTIONS AND SAE J517 HOSE SHALL NOT EXCEED THE LOWER OF The two WORKING PRESSURE RATED Standards. Flanged heads shall be as specified in Figure 3 and Table 0. Split flange clamp halves shall be as specified in Figure 4 and Table 1. Port dimensions and spacing shall be as specified in Figure 5 and Table just. O-ring seals, having nominal dimensions as indicated in Table 1, are used in conjunction with these hubs. They shall conform to the seals specified in SAE J120, Table on Dimensions and Tolerances. Bolts for use with these connections shall be within the sizes and lengths indicated in Table 1. They can be of SAE Grade 5 material or better as specified by SAE J429. Socket head cap screws of SAE Grade 5 material or better are acceptable. Lock washers, if used, shall remain in accordance with the lighting spring lock washers specified in SAE J489, Dimensions of Light, Medium, Heavy, Extra Heavy, and Hi Collar Spring Lock Washers, properly sizes applicable to your corresponding bolts. The following general specifications supplement the dimensional data confined in Table 1 with respect to all unspecified detail. This specification covers the pipe material and wall thickness applicable to lap joint flange pipe ends, manufactured by a mechanical forming strategy. The lap joint flange connection already been widely used for low-pressure systems in marine, process piping, and similar businesses. The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This Standard covers the complete general, dimensional, mechanical, and also gratification data for metric prevailing-torque hex nuts and hex flange nuts of property classes 5, 9, and 10 as defined in ASTM A563M. The inclusion of dimensional data in this Standard is not intended to shows that all of the nut sizes in conjunction with the various options described herein are stock items. Consumers should consult with suppliers concerning lists of stock production prevailing-torque hex and hex flange insane.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...