We professionally supply high quality hose and fittings.

ShIP to

NEWS

Home  > NEWS  > 

Using Reusable Field Fit Hydraulic Hose Fittings To Assemble Hydraulic Hose

Using Reusable Field Fit Hydraulic Hose Fittings To Assemble Hydraulic Hose

2019-07-10

At first you need to be ready for some tools and apply grease to inside and outside of hose.Then please carefully screw hose into back of fitting in counter clockwise direction.Ensure that hose has bottomed out at base of fittings.Unscrew in clockwise direction 1/2 turn. Lubricate hosetail body then hosetail threads.Screw tail into body clockwise.Remove from vice. Mark hose to your desired assembled length.In this example the assembled hose length will be 800mm.Line up end of the hose fitting with the end of hose,then lay body against the end of the thread. Mark hose at 12mm(1/2”) behind body.Hold hose in vice firmly but not too tight.Use angle grinder with metal cutting disk.Apply slight pulling tension to end of hose.Carefully cut hose squarely.Clean out hose with compressed air to remove all abrasive particles from inside of hose.Remember to screw hose in an anti-clockwise direction.Make sure hose bottoms out at the end of base of body,back hose off a 1/2 turn clockwise.Blast clean with compressed air.Check finished assembled length.Pressure test to 4000PSI to test strength of connection.


 

Chat Online 编辑模式下无法使用
Chat Online inputting...